S series Switching Power Supply

98*97*35mm

1.  The testing condition for the paramenter adove is : 230vAC input,rated load,25°C70% RH.Temperature.2.  Error.include the setting error,ling stability and load stability.(Note:5).3.  Wave test:adopting"A12"double wire for 20MHz,and 0.1 UF&47UF capacitor short-circuitfor interrupting.4.  Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.  Load stability test:The load is from 0%t o 100%.

Model	S-25-5	S-25-12	S-25-15	S-25-24
Specification
DC output voltage	5V	12V	24V	24V
Output voltage range	±2%	±1%	±1%	±1%
Rated output current	5A	2.1A	1.7A	1.1A
Output current ranqe	0-5A	0-2.1A	0-1.7A	0-1.1A
Wave and noise	100mVp-p	50mVp-p	50mVp-p	50mVp-p
Inlet stability	±0.5%	±0.5%	±0.5%	±0.5%
Load stability	±1%	±0.5%	±0.5%	±0.5%
DC output power	25W	25.2W	25.5W	26.4W
Efficiency	70%	76%	77%	80%
Adjustable range for DC voltage	+10,-5%	±10%	±10%	±10%
AC input voltage range	85~132VAC/170~264VA selected bv switch 47~63Hz,240~370VDC
Input current	0.6A/115V 0.35A/230V
AC Inrush current	Cold-start current 15A/115V 30A/230V
Leakage current	<0.75mA/240VAC
Overload proctection	105%-150% Tvee:oulsina hiccup shutdown Reset: auto recoverv
Over-voltage protection	115%-135%
High-temperature protection
Temperature coefficient	±0.03%/°C(0~50°C)
Setup, rise, hold up time	800ms 50ms 10ms/115VAC300ms,50ms,80ms/230VAC
Vibration	10~500Hz, 2G 10min,/1 cycle. Pariod for 60min,Each axes
Withstand voltage	Input and output internal:1.5KvAC,Input and enclosure:l.5KvAC,Output and enclosure:0.5KvA
Isolation resistance	input and output internah’lnput and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidi	-10°C~+60°C,20%~90%RH
Store temperature and humidity	-20°C~+85°C,10%~95%RH
Overall dimension	99X97X25mm
Weight	0.37kgS
Safety standards	UL1012 TUVEN60950(IEC,UL1950)Approved
EMC standards	CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification

S series Switching Power Supply